High Quality Marble Mosaic Tile Hexagon

#unit-CMbjndSSAPiUOB1{padding-top:3vw;padding-left:2vw;padding-right:2vw;padding-bottom:3vw;}#unit-CMbjndSSAPiUOB1 [ce-data-type="inner"]{flex-direction:column;border-style:double;border-width:0;}#unit-CMbjndSSAPiUOB1 .ce-video_inner{display:block;}#unit-CMbjndSSAPiUOB1 .ce-video_poster{display:block;position:relative;z-index:1;}#unit-CMbjndSSAPiUOB1 .ce-list_items{margin:-0.8vw;margin-top:-0.8vw;padding-top:0px;margin-bottom:-0.8vw;padding-bottom:0px;margin-left:-0.8vw;padding-left:0px;margin-right:-0.8vw;padding-right:0px;}#unit-CMbjndSSAPiUOB1 .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-CMbjndSSAPiUOB1 .ce-image{--image-effect:1;}#unit-CMbjndSSAPiUOB1 [ce-data-type="image"]{display:none;}#unit-CMbjndSSAPiUOB1 [ce-data-type="subtitle"]{display:none;}#unit-CMbjndSSAPiUOB1 [ce-data-type="title"]{padding-bottom:1vw;color:rgba(0, 0, 0, 1);font-size:21px;}@media(max-width:1199px){#unit-CMbjndSSAPiUOB1 .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-CMbjndSSAPiUOB1{padding-top:5vw;}}












I.What is China's National Standard for Tile Anti-Slip Ratings?



China's current applicable standard is GB/T 4100-2015 《Ceramic Tiles》. In this standard, anti-slip performance is evaluated based on two indicators: Static Friction Coefficient (COF) and Dynamic Friction Coefficient (DIN), and is classified into 5 grades:




#unit-I5orO1yKpNBVxNU [ce-data-type="text"]{text-align:center;}#unit-I5orO1yKpNBVxNU{padding-left:1vw;padding-right:1vw;}



R9 (COF ≥ 0.5): Mild antislip, suitable for dry indoor environments (e.g., bedrooms, living rooms).
R10 (COF ≥ 0.6): Moderate anti-slip, suitable for occasionally wet and slippery areas such as kitchens and balconies.
R11 (COF ≥ 0.7): Strong anti-slip, recommended for high-frequency wet and slippery scenarios like bathrooms and restaurants.
R12 (COF ≥ 0.8): High anti-slip, used in public toilets, areas around swimming pools, etc.
R13 (COF ≥ 0.9): Ultra-high anti-slip, applicable to extreme environments such as ramps and industrial workshops.


Professional data source: Appendix M of GB/T 4100-2015 issued by 《the State Administration for Market Regulation of China》. The testing methods include the inclined platform method (EN 13036-4) and the pendulum test method (DIN 51130). A higher numerical value indicates stronger anti-slip performance.






#cell-nKLytG1yIbdohqT{justify-content:center;flex-direction:column;display:flex;webkit-justify-content:center;align-items:center;webkit-align-items:center;webkit-flex-direction:column;}#unit-JYOWOJvnHCC0Qs9 .ce-image_inner{justify-content:center;}#unit-JYOWOJvnHCC0Qs9 .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-JYOWOJvnHCC0Qs9 .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}









#cell-Uldiub6R7cIepys{justify-content:center;flex-direction:column;display:flex;webkit-justify-content:center;align-items:center;webkit-align-items:center;webkit-flex-direction:column;}#unit-9PfAAVmGVUl8amh .ce-image_inner{justify-content:center;}#unit-9PfAAVmGVUl8amh .ce-image_item{--image-scale:auto;--svg-color:rgba(241, 71, 62,1);padding-top:230%;}#unit-9PfAAVmGVUl8amh .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}@media(max-width:1199px){#unit-9PfAAVmGVUl8amh .ce-image_item{padding-top:177.78%;}}









#unit-vLMn3CsrdHBEhuX{padding-left:1vw;padding-right:1vw;padding-top:3vw;}

II. How to Select Anti-Slip Ratings Based on Scenarios?
1. Residential Scenarios For bathroom and kitchen floors, an anti-slip rating of **R11 or above** is recommended, especially for households with the elderly or children. - For living rooms and bedrooms, R9-R10 is a suitable choice, balancing safety and aesthetics. 2. Public Scenarios Shopping malls, hospital corridors require an anti-slip rating of **R12 or above** to avoid slip risks in crowded areas. - Outdoor steps and ramps **mandatorily require R13**, in compliance with the "Technical Specification for Anti-slip of Building Flooring Engineering" (JGJ/T 331-2014).

III.Comparison of Differences Between International Standards and China's StandardsEurope and the United States commonly adopt standards such as ASTM C1028 (U.S.) and DIN 51130 (Germany). The main differences are as follows:
Testing Methods:In the U.S., a dry/wet COF ≥ 0.6 is regarded as the safety threshold; in Germany, classification is based on ramp angles (e.g., Grade A corresponds to a 9°-10° incline).
Rating Labeling:

China directly labels with R-values; some European countries use the "ABC" classification (e.g., anti-slip Grade B ≈ R11).



#unit-JuR9RteHJBSQySB{padding-top:3vw;padding-left:1vw;padding-right:1vw;}

IV. 3 Practical Tips to Avoid Mistakes When Purchasing Anti-Slip Tiles 1. Check the Test Report: Request the merchant to provide anti-slip coefficient test data certified by CMA (China Inspection Body and Laboratory Mandatory Approval). 2. On-Site Verification: Pour water on the tile surface on-site, then rub it with shoe soles to check for obvious resistance. 3. Focus on Surface Technology: Prioritize tiles with matte finish, concave-convex texture, or anti-slip glaze treatment. Additional Reminder: Anti-slip performance will deteriorate due to wear and tear during use. It is recommended to regularly clean oil stains and avoid waxing the tiles. During project acceptance, re-testing can be conducted in accordance with the "Standard for Testing Bond Strength of Facing Bricks in Building Engineering" (JGJ 110-2017).
#unit-2Vz9jotjf12quHi .ce-image_inner{justify-content:center;}#unit-2Vz9jotjf12quHi .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-2Vz9jotjf12quHi .ce-image{--image-effect:1;}

#unit-xTo94QNHBchKHMz{background-color:rgba(248, 248, 248, 1);padding-left:10vw;padding-right:10vw;}

一、Mosaic Laying Process Flow1. Preparation
Prepare materials: Choose special adhesive (e.g., alkali-resistant adhesive for glass mosaics) and matching grout based on mosaic material (glass, ceramic, stone, etc.); tools include a small notched trowel (tooth depth 3-5mm), level, small rubber mallet, masking tape, small grout trowel, and sponge. Check mosaics in advance: For mesh-backed mosaics, ensure the mesh is intact; layout according to the laying area size, avoiding overly small pieces at corners (minimum piece size ≥ 1/3 of a full piece is recommended).



#unit-HBIIEVGRlYkaVpZ .ce-image_inner{justify-content:center;}#unit-HBIIEVGRlYkaVpZ .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-HBIIEVGRlYkaVpZ .ce-image{--image-effect:1;}









#unit-dV7RCDr2nU33iqF{padding-left:10vw;padding-right:10vw;}#unit-dV7RCDr2nU33iqF [ce-data-type="text"]{font-size:17px;line-height:2;}



2.Base Layer Treatment：
Clean the base layer: Remove dust, oil stains, and hollow areas from walls/floors; fill cracks in the base layer with repair mortar if any; the flatness error of the base layer must be ≤ 2mm (mosaics have small pieces, requiring higher flatness), and level uneven areas with cement mortar; spray water to moisten walls before laying (for stone mosaics, an interface agent must be brushed on the base layer to improve adhesion).



#unit-I3LvFAXDUGPNFXX .ce-image_inner{justify-content:center;}#unit-I3LvFAXDUGPNFXX .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-I3LvFAXDUGPNFXX .ce-image{--image-effect:1;}#unit-I3LvFAXDUGPNFXX{padding-left:3vw;padding-right:3vw;}









#unit-0EtfMVpyx3kyCOP{padding-left:10vw;padding-right:10vw;}



3.Snap Line Positioning
Use a chalk line to snap horizontal and vertical lines, marking the laying reference lines (one control line every 1m is recommended); mark the mosaic laying direction (e.g., horizontal/vertical) on the base layer according to the layout drawing, and lay full-mesh mosaics first at door/window openings to ensure visual symmetry.




#unit-PW1mHt6wYGJhLft{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-PW1mHt6wYGJhLft [ce-data-type="inner"]{flex-direction:column;}#unit-PW1mHt6wYGJhLft .ce-video_inner{display:block;}#unit-PW1mHt6wYGJhLft .ce-video_poster{display:block;position:relative;z-index:1;}#unit-PW1mHt6wYGJhLft .ce-list_items{margin:-0.8vw;}#unit-PW1mHt6wYGJhLft .ce-image_item{--svg-color:rgba(241, 71, 62,1);--image-scale:0.56;padding-top:56%;}#unit-PW1mHt6wYGJhLft .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-PW1mHt6wYGJhLft [ce-data-type="title"]{text-align:center;display:none;}#unit-PW1mHt6wYGJhLft [ce-data-type="subtitle"]{display:none;}#unit-PW1mHt6wYGJhLft [ce-data-type="summary"]{display:none;}#unit-PW1mHt6wYGJhLft .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-PW1mHt6wYGJhLft .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-PW1mHt6wYGJhLft{padding-top:5vw;}}












标记






#unit-snHZYzx5b6o60YN{padding-left:10vw;padding-right:10vw;padding-top:3vw;}

4.Adhesive Application
Mix the adhesive: Add water and mix according to the instruction manual until it is smooth paste without particles, let it stand for 5-10 minutes, then mix again (to improve viscosity); use a small notched trowel to evenly apply the adhesive on the base layer along the reference line (thickness 3-5mm, trowel direction perpendicular to the mosaic laying direction to ensure uniform adhesive teeth), and apply no more than 1㎡ each time (to prevent the adhesive from solidifying too quickly).




#unit-gLNyWtZpvakrZBR{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-gLNyWtZpvakrZBR [ce-data-type="inner"]{flex-direction:column;}#unit-gLNyWtZpvakrZBR .ce-video_inner{display:block;}#unit-gLNyWtZpvakrZBR .ce-video_poster{display:block;position:relative;z-index:1;}#unit-gLNyWtZpvakrZBR .ce-list_items{margin:-0.8vw;}#unit-gLNyWtZpvakrZBR .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-gLNyWtZpvakrZBR .ce-image{--image-effect:1;}#unit-gLNyWtZpvakrZBR [ce-data-type="title"]{text-align:center;display:none;}#unit-gLNyWtZpvakrZBR [ce-data-type="subtitle"]{display:none;}#unit-gLNyWtZpvakrZBR [ce-data-type="summary"]{display:none;}#unit-gLNyWtZpvakrZBR .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-gLNyWtZpvakrZBR .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-gLNyWtZpvakrZBR{padding-top:5vw;}}












贴花砖






#unit-zz3Hshix7jkPtoE{padding-left:10vw;padding-right:10vw;padding-top:3vw;}

5. Mosaic Laying
Mesh-backed mosaics: Gently press the full-mesh mosaic on the adhesive, tap lightly along the mesh with a small rubber mallet (even force to avoid piece displacement), ensuring each mosaic piece adheres to the adhesive; check flatness with a level, error ≤ 1mm. Loose mosaics: Lay piece by piece according to the layout drawing, adjust small pieces with tweezers, and press lightly to fix after laying. 15-20 minutes after laying (when the adhesive is semi-dry), peel off the mesh (gently to avoid lifting mosaics); if any piece falls off, reattach it with adhesive immediately.




#unit-ar9eAxS4WvhEZKl{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-ar9eAxS4WvhEZKl [ce-data-type="inner"]{flex-direction:column;}#unit-ar9eAxS4WvhEZKl .ce-video_inner{display:block;}#unit-ar9eAxS4WvhEZKl .ce-video_poster{display:block;position:relative;z-index:1;}#unit-ar9eAxS4WvhEZKl .ce-list_items{margin:-0.8vw;}#unit-ar9eAxS4WvhEZKl .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-ar9eAxS4WvhEZKl .ce-image{--image-effect:1;}#unit-ar9eAxS4WvhEZKl [ce-data-type="title"]{text-align:center;display:none;}#unit-ar9eAxS4WvhEZKl [ce-data-type="subtitle"]{display:none;}#unit-ar9eAxS4WvhEZKl [ce-data-type="summary"]{display:none;}#unit-ar9eAxS4WvhEZKl .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-ar9eAxS4WvhEZKl .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-ar9eAxS4WvhEZKl{padding-top:5vw;}}












马赛克粘贴






#unit-WdmgZeymsikfZx5{padding-left:10vw;padding-right:10vw;padding-top:3vw;}

6. Gap Treatment
24 hours after laying (when the adhesive is fully cured), clean dust on the mosaic surface; use a small grout trowel to fill gaps with grout (mosaic gaps are narrow, so press repeatedly to ensure full filling and avoid hollowing); 10-15 minutes after grouting, wipe the surface with a damp sponge along the gap direction to remove residual grout (to prevent difficulty in cleaning after drying), taking care not to scrape the grout in the gaps.






#unit-mKvLuXuO2zTRvdi{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-mKvLuXuO2zTRvdi [ce-data-type="inner"]{flex-direction:column;}#unit-mKvLuXuO2zTRvdi .ce-video_inner{display:block;}#unit-mKvLuXuO2zTRvdi .ce-video_poster{display:block;position:relative;z-index:1;}#unit-mKvLuXuO2zTRvdi .ce-list_items{margin:-0.8vw;}#unit-mKvLuXuO2zTRvdi .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-mKvLuXuO2zTRvdi .ce-image{--image-effect:1;}#unit-mKvLuXuO2zTRvdi [ce-data-type="title"]{text-align:center;display:none;}#unit-mKvLuXuO2zTRvdi [ce-data-type="subtitle"]{display:none;}#unit-mKvLuXuO2zTRvdi [ce-data-type="summary"]{display:none;}#unit-mKvLuXuO2zTRvdi .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-mKvLuXuO2zTRvdi .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-mKvLuXuO2zTRvdi{padding-top:5vw;}}












马赛克清洁






#unit-JJOcykZXISqioZx{padding-left:10vw;padding-right:10vw;padding-top:3vw;}

7. Curing & Protection
Cure naturally for 5-7 days after grouting, avoiding stepping, getting wet, or collision during this period (mosaic pieces are easy to loosen due to external force); cover with a transparent protective film during curing to prevent dust pollution or direct sunlight from cracking the grout; avoid acidic detergents touching glass mosaics during curing (to prevent surface corrosion).






#unit-8f4y1VeGodnaMnR{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-8f4y1VeGodnaMnR [ce-data-type="inner"]{flex-direction:column;}#unit-8f4y1VeGodnaMnR .ce-video_inner{display:block;}#unit-8f4y1VeGodnaMnR .ce-video_poster{display:block;position:relative;z-index:1;}#unit-8f4y1VeGodnaMnR .ce-list_items{margin:-0.8vw;}#unit-8f4y1VeGodnaMnR .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-8f4y1VeGodnaMnR .ce-image{--image-effect:1;}#unit-8f4y1VeGodnaMnR [ce-data-type="title"]{text-align:center;display:none;}#unit-8f4y1VeGodnaMnR [ce-data-type="subtitle"]{display:none;}#unit-8f4y1VeGodnaMnR [ce-data-type="summary"]{display:none;}#unit-8f4y1VeGodnaMnR .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-8f4y1VeGodnaMnR .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-8f4y1VeGodnaMnR{padding-top:5vw;}}















×














泳池马赛克






#unit-GeeMM3qG2BsTHwD{padding-left:10vw;padding-right:10vw;padding-top:3vw;}

二、Mosaic Laying Precautions


1.Before Laying
Material adaptation: Do not use ordinary cement mortar for glass mosaics (prone to alkali efflorescence and surface pollution); choose alkali-resistant special adhesive; stone mosaics need waterproof treatment in advance (to prevent discoloration from water absorption). - Uniform batches: Use mosaics from the same batch in the same area to avoid color difference caused by production batch differences; for mesh-backed mosaics, check the mesh material (non-woven mesh is easier to peel off than paper mesh).






#unit-gnmRy2OiyzPnAzR{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-gnmRy2OiyzPnAzR [ce-data-type="inner"]{flex-direction:column;}#unit-gnmRy2OiyzPnAzR .ce-video_inner{display:block;}#unit-gnmRy2OiyzPnAzR .ce-video_poster{display:block;position:relative;z-index:1;}#unit-gnmRy2OiyzPnAzR .ce-list_items{margin:-0.8vw;}#unit-gnmRy2OiyzPnAzR .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-gnmRy2OiyzPnAzR .ce-image{--image-effect:1;}#unit-gnmRy2OiyzPnAzR [ce-data-type="title"]{text-align:center;display:none;}#unit-gnmRy2OiyzPnAzR [ce-data-type="subtitle"]{display:none;}#unit-gnmRy2OiyzPnAzR [ce-data-type="summary"]{display:none;}#unit-gnmRy2OiyzPnAzR .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-gnmRy2OiyzPnAzR .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-gnmRy2OiyzPnAzR{padding-top:5vw;}}












展厅 (28)






#unit-tYMcTJ3thqEw8eS{padding-left:10vw;padding-right:10vw;padding-top:3vw;}

2.During Laying
Adhesive validity: The mixed adhesive must be used within 1.5 hours (mosaic laying is slow, to avoid premature solidification of the adhesive); if the adhesive dries and clumps, do not add water to remix (discard and remix). - Mesh peeling timing: Peeling the mesh too early may cause mosaic displacement, while peeling too late may make the mesh stick to the adhesive (the best time is 15-20 minutes after laying, when the adhesive is not sticky to the touch).






#unit-1T0oZGVr51VL96t{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-1T0oZGVr51VL96t [ce-data-type="inner"]{flex-direction:column;}#unit-1T0oZGVr51VL96t .ce-video_inner{display:block;}#unit-1T0oZGVr51VL96t .ce-video_poster{display:block;position:relative;z-index:1;}#unit-1T0oZGVr51VL96t .ce-list_items{margin:-0.8vw;}#unit-1T0oZGVr51VL96t .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-1T0oZGVr51VL96t .ce-image{--image-effect:1;}#unit-1T0oZGVr51VL96t [ce-data-type="title"]{text-align:center;display:none;}#unit-1T0oZGVr51VL96t [ce-data-type="subtitle"]{display:none;}#unit-1T0oZGVr51VL96t [ce-data-type="summary"]{display:none;}#unit-1T0oZGVr51VL96t .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-1T0oZGVr51VL96t .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-1T0oZGVr51VL96t{padding-top:5vw;}}












卡拉拉马赛克






#unit-wmFnStULH5xVJ35{padding-left:10vw;padding-right:10vw;padding-top:3vw;}



3.After Laying
Curing duration: Longer than ordinary tiles (at least 5 days), especially for glass and stone mosaics; early use may cause piece falling or grout cracking. - Cleaning method: Use neutral detergent + soft cloth for daily cleaning; do not scratch with steel wool or sharp tools (glass mosaic surfaces are easy to scratch, and stone mosaics are easy to be damaged); if the grout falls off locally, refill with the same color grout and cure for 2-3 days.

#unit-xTo94QNHBchKHMz{background-color:rgba(248, 248, 248, 1);padding-left:3vw;padding-right:3vw;}

一、Tile Laying Process Flow1. Preparation
Prepare tiles, tile adhesive/cement mortar, notched trowel, level, rubber mallet, masking tape, grout and other tools & materials; cut tiles in advance according to the size of the laying area (avoid small cut pieces gathering at corners).



#unit-HBIIEVGRlYkaVpZ .ce-image_inner{justify-content:center;}#unit-HBIIEVGRlYkaVpZ .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-HBIIEVGRlYkaVpZ .ce-image{--image-effect:1;}









#unit-dV7RCDr2nU33iqF{padding-left:3vw;padding-right:3vw;}#unit-dV7RCDr2nU33iqF [ce-data-type="text"]{font-size:17px;line-height:2;}



2.Base Layer Treatment：
Clean dust, oil stains and hollow areas on the wall/floor; if the base layer flatness error is ＞3mm, level it with cement mortar; spray water to moisten the wall before laying (to improve adhesion).

#unit-I3LvFAXDUGPNFXX .ce-image_inner{justify-content:center;}#unit-I3LvFAXDUGPNFXX .ce-image_item{--svg-color:rgba(241, 71, 62,1);--image-scale:0.75;padding-top:75%;}#unit-I3LvFAXDUGPNFXX .ce-image{height:100%;width:100%;--image-effect:2;}#unit-I3LvFAXDUGPNFXX{padding-left:3vw;padding-right:3vw;}









#unit-0EtfMVpyx3kyCOP{padding-left:3vw;padding-right:3vw;}



3.Snap Line Positioning


Use a chalk line to snap horizontal and vertical lines, marking the reference for tile laying; plan the layout according to tile size (e.g., lay whole tiles first at door/window openings to ensure visual neatness).




#unit-PW1mHt6wYGJhLft{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-PW1mHt6wYGJhLft [ce-data-type="inner"]{flex-direction:column;}#unit-PW1mHt6wYGJhLft .ce-video_inner{display:block;}#unit-PW1mHt6wYGJhLft .ce-video_poster{display:block;position:relative;z-index:1;}#unit-PW1mHt6wYGJhLft .ce-list_items{margin:-0.8vw;}#unit-PW1mHt6wYGJhLft .ce-image_item{--svg-color:rgba(241, 71, 62,1);--image-scale:0.56;padding-top:56%;}#unit-PW1mHt6wYGJhLft .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-PW1mHt6wYGJhLft [ce-data-type="title"]{text-align:center;display:none;}#unit-PW1mHt6wYGJhLft [ce-data-type="subtitle"]{display:none;}#unit-PW1mHt6wYGJhLft [ce-data-type="summary"]{display:none;}#unit-PW1mHt6wYGJhLft .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-PW1mHt6wYGJhLft .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-PW1mHt6wYGJhLft{padding-top:5vw;}}












标记






#unit-snHZYzx5b6o60YN{padding-left:3vw;padding-right:3vw;padding-top:3vw;}

4.Mixing & Application


Stir tile adhesive/cement mortar until there are no particles and it is paste-like (let it stand for 5 minutes, then stir again); use a notched trowel to evenly apply it on the base layer along the reference line (thickness 5-8mm, trowel tooth depth matches tile size).




#unit-gLNyWtZpvakrZBR{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-gLNyWtZpvakrZBR [ce-data-type="inner"]{flex-direction:column;}#unit-gLNyWtZpvakrZBR .ce-video_inner{display:block;}#unit-gLNyWtZpvakrZBR .ce-video_poster{display:block;position:relative;z-index:1;}#unit-gLNyWtZpvakrZBR .ce-list_items{margin:-0.8vw;}#unit-gLNyWtZpvakrZBR .ce-image_item{--svg-color:rgba(241, 71, 62,1);--image-scale:0.75;padding-top:75%;}#unit-gLNyWtZpvakrZBR .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-gLNyWtZpvakrZBR [ce-data-type="title"]{text-align:center;display:none;}#unit-gLNyWtZpvakrZBR [ce-data-type="subtitle"]{display:none;}#unit-gLNyWtZpvakrZBR [ce-data-type="summary"]{display:none;}#unit-gLNyWtZpvakrZBR .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-gLNyWtZpvakrZBR .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-gLNyWtZpvakrZBR{padding-top:5vw;}}












涂抹瓷砖胶






#unit-zz3Hshix7jkPtoE{padding-left:3vw;padding-right:3vw;padding-top:3vw;}

5. Tile Laying
Press the tile lightly on the adhesive layer, tap the four corners with a rubber mallet (ensure tight fit without hollowing); check flatness with a level, error ≤1mm; leave 2-3mm expansion gaps between adjacent tiles (prevent cracking from thermal expansion).




#unit-ar9eAxS4WvhEZKl{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-ar9eAxS4WvhEZKl [ce-data-type="inner"]{flex-direction:column;}#unit-ar9eAxS4WvhEZKl .ce-video_inner{display:block;}#unit-ar9eAxS4WvhEZKl .ce-video_poster{display:block;position:relative;z-index:1;}#unit-ar9eAxS4WvhEZKl .ce-list_items{margin:-0.8vw;}#unit-ar9eAxS4WvhEZKl .ce-image_item{--svg-color:rgba(241, 71, 62,1);--image-scale:0.75;padding-top:75%;}#unit-ar9eAxS4WvhEZKl .ce-image{height:100%;width:100%;--image-effect:3;object-fit:cover;}#unit-ar9eAxS4WvhEZKl [ce-data-type="title"]{text-align:center;display:none;}#unit-ar9eAxS4WvhEZKl [ce-data-type="subtitle"]{display:none;}#unit-ar9eAxS4WvhEZKl [ce-data-type="summary"]{display:none;}#unit-ar9eAxS4WvhEZKl .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-ar9eAxS4WvhEZKl .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-ar9eAxS4WvhEZKl{padding-top:5vw;}}












贴砖2






#unit-WdmgZeymsikfZx5{padding-left:3vw;padding-right:3vw;padding-top:3vw;}

6. Gap Treatment
24 hours after laying, clean stains on the tile surface; use a grout gun to fill gaps with grout (full without gaps); when the grout is semi-dry, wipe off residual grout with a damp sponge.


#unit-mKvLuXuO2zTRvdi{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-mKvLuXuO2zTRvdi [ce-data-type="inner"]{flex-direction:column;}#unit-mKvLuXuO2zTRvdi .ce-video_inner{display:block;}#unit-mKvLuXuO2zTRvdi .ce-video_poster{display:block;position:relative;z-index:1;}#unit-mKvLuXuO2zTRvdi .ce-list_items{margin:-0.8vw;}#unit-mKvLuXuO2zTRvdi .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-mKvLuXuO2zTRvdi .ce-image{--image-effect:1;}#unit-mKvLuXuO2zTRvdi [ce-data-type="title"]{text-align:center;display:none;}#unit-mKvLuXuO2zTRvdi [ce-data-type="subtitle"]{display:none;}#unit-mKvLuXuO2zTRvdi [ce-data-type="summary"]{display:none;}#unit-mKvLuXuO2zTRvdi .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-mKvLuXuO2zTRvdi .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-mKvLuXuO2zTRvdi{padding-top:5vw;}}












填缝






#unit-JJOcykZXISqioZx{padding-left:3vw;padding-right:3vw;padding-top:3vw;}

7. Curing & Protection
Avoid stepping on or getting water on the grout after filling; cure naturally for 3-5 days; cover with a protective film during curing (prevent dust pollution or external damage).






#unit-8f4y1VeGodnaMnR{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-8f4y1VeGodnaMnR [ce-data-type="inner"]{flex-direction:column;}#unit-8f4y1VeGodnaMnR .ce-video_inner{display:block;}#unit-8f4y1VeGodnaMnR .ce-video_poster{display:block;position:relative;z-index:1;}#unit-8f4y1VeGodnaMnR .ce-list_items{margin:-0.8vw;}#unit-8f4y1VeGodnaMnR .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-8f4y1VeGodnaMnR .ce-image{--image-effect:1;}#unit-8f4y1VeGodnaMnR [ce-data-type="title"]{text-align:center;display:none;}#unit-8f4y1VeGodnaMnR [ce-data-type="subtitle"]{display:none;}#unit-8f4y1VeGodnaMnR [ce-data-type="summary"]{display:none;}#unit-8f4y1VeGodnaMnR .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-8f4y1VeGodnaMnR .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-8f4y1VeGodnaMnR{padding-top:5vw;}}












瓷砖养护






#unit-GeeMM3qG2BsTHwD{padding-left:3vw;padding-right:3vw;padding-top:3vw;}

二、Tile Laying Precautions


1.Before Laying
Check tile batches: Use tiles from the same batch in the same area (avoid color difference);
Soak tiles (only for tiles with water absorption rate ＞10%): Soak until no bubbles appear, then fish out and drain (prevent hollowing caused by tiles absorbing moisture from the adhesive layer).






#unit-gnmRy2OiyzPnAzR{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-gnmRy2OiyzPnAzR [ce-data-type="inner"]{flex-direction:column;}#unit-gnmRy2OiyzPnAzR .ce-video_inner{display:block;}#unit-gnmRy2OiyzPnAzR .ce-video_poster{display:block;position:relative;z-index:1;}#unit-gnmRy2OiyzPnAzR .ce-list_items{margin:-0.8vw;}#unit-gnmRy2OiyzPnAzR .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-gnmRy2OiyzPnAzR .ce-image{--image-effect:1;}#unit-gnmRy2OiyzPnAzR [ce-data-type="title"]{text-align:center;display:none;}#unit-gnmRy2OiyzPnAzR [ce-data-type="subtitle"]{display:none;}#unit-gnmRy2OiyzPnAzR [ce-data-type="summary"]{display:none;}#unit-gnmRy2OiyzPnAzR .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-gnmRy2OiyzPnAzR .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-gnmRy2OiyzPnAzR{padding-top:5vw;}}












IMG_20230914_144257






#unit-tYMcTJ3thqEw8eS{padding-left:3vw;padding-right:3vw;padding-top:3vw;}

2.During Laying
Adhesive layer to be mixed and used immediately: Tile adhesive/cement mortar must be used within 2 hours after mixing (avoid solidification and failure);
Adjust deviations in time: If tiles are tilted or hollow, re-lay them before the adhesive layer solidifies (within 1 hour).




#unit-1T0oZGVr51VL96t{padding-top:3vw;padding-left:3vw;padding-right:3vw;}#unit-1T0oZGVr51VL96t [ce-data-type="inner"]{flex-direction:column;}#unit-1T0oZGVr51VL96t .ce-video_inner{display:block;}#unit-1T0oZGVr51VL96t .ce-video_poster{display:block;position:relative;z-index:1;}#unit-1T0oZGVr51VL96t .ce-list_items{margin:-0.8vw;}#unit-1T0oZGVr51VL96t .ce-image_item{--svg-color:rgba(241, 71, 62,1);}#unit-1T0oZGVr51VL96t .ce-image{--image-effect:1;}#unit-1T0oZGVr51VL96t [ce-data-type="title"]{text-align:center;display:none;}#unit-1T0oZGVr51VL96t [ce-data-type="subtitle"]{display:none;}#unit-1T0oZGVr51VL96t [ce-data-type="summary"]{display:none;}#unit-1T0oZGVr51VL96t .ce-image_inner{justify-content:center;}@media(max-width:1199px){#unit-1T0oZGVr51VL96t .ce-list_items{margin:-1.5vw;}}@media(max-width:767px){#unit-1T0oZGVr51VL96t{padding-top:5vw;}}












IMG_20230914_144033






#unit-wmFnStULH5xVJ35{padding-left:3vw;padding-right:3vw;padding-top:3vw;}



3.After Laying
Prohibit early use: Do not roll heavy objects on the floor within 7 days after laying; do not hang heavy objects on the wall within 10 days after laying;
Cleaning taboos: Do not scratch the tile surface with sharp tools; clean stains with neutral detergent (prevent corrosion of tiles or grout).